24VDC

24VDC

IMRE1SS16/24/DM37

Relay Module 1CO 24VDC (SPDT) With DSUB Input

-These modules offer the convenience of triggering/actuating the relays by connecting a DSUB Connector harness from the PLC/Controller to the input of the module.In these modules the DSUB Connector pins are so configured that all the relay inputs are positively bussed.
Switching Current upto 10 A at 230 VAC (or 30 VDC).
Low Coil Drive Current(4.7mA to 100mA)
LED Indication to denote relay actuation.
Easy to replace pluggable relays.
Relay Coil protection by means of a freewheeling Diode.
Mounting Options available: Din Rail mounting & Panel mounting.

IMRE1SS16/24/DM37

Relay Module 1CO 24VDC (SPDT) With DSUB Input

-These modules offer the convenience of triggering/actuating the relays by connecting a DSUB Connector harness from the PLC/Controller to the input of the module.In these modules the DSUB Connector pins are so configured that all the relay inputs are positively bussed.
Switching Current upto 10 A at 250 VAC (or 30 VDC).
LED Indication to denote relay actuation.
Easy to replace pluggable relays.
Relay Coil protection by means of a freewheeling Diode.
Mounting Options available: Din Rail mounting & Panel mounting.

IMRE2SS16/24/DM37

Relay Module 2CO 24VDC (DPDT) With DSUB Input

-These modules offer the convenience of Triggering/actuating the relays by connecting a DSUB connector harness fromthe PLC/Controller to the input of the module.In these modules the DSUB Connector pins are so configured that all the relay inputs are positively bussed.As an alternate PCB terminal blocks are also providedto utilize descrete wiring methods where such DSUB Connector harnesses are not available
Switching Current upto 5 A at 230VAC (30 VDC)
Low Coil Drive Current(4.7 ma to 100 ma)
Easy to Replace pluggable relays.
LED Indication to denote relay actuation
Relay Coil protection by means of a Freewheelingode
Mounting Options available:DIN Rail mounting & Panel mounting.

IMRE2SS16/24/DM37

Relay Module 2CO 24VDC (DPDT) With DSUB Input

These modules offer the convenience of Triggering/actuating the relays by connecting a DSUB connector harness fromthe PLC/Controller to the input of the module.In these modules the DSUB Connector pins are so configured that all the relay inputs are positively bussed.As an alternate PCB terminal blocks are also providedto utilize descrete wiring methods where such DSUB Connector harnesses are not available
Easy to Replace pluggable relays.
LED Indication to denote relay actuation
Relay Coil protection by means of a Freewheelingode
Mounting Options available:DIN Rail mounting & Panel mounting.