Stud/Bolt

Stud/Bolt

CSTSB3

M3 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 0.25 to 4 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSB4/N4

M4 sized Stud Type Terminal Blocks, suitable for operation with screwdriver and nut driver.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 10 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSB4

M4 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 10 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSB5

M5 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 16 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSN4

M4 sized Stud Type Terminal Blocks, suitable for operation with nut driver.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 10 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSN415P

2.5 sq.mm Terminal Blocks in Push in with diode circuit - DD3 configuration

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 10 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSN5

2.5 sq.mm Terminal Blocks in push-in connection with diode circuit - DD4 configuration

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 16 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSN515P

M5 sized Stud Type Terminal Blocks, suitable for operation with nut driver - in 15 mm thickness.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 16 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSN6

M6 sized Stud Type Terminal Blocks, suitable for operation with nut driver.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 35 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSRN5

M5 sized Stud Type Terminal Blocks, suitable for operation with nut driver.

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 16 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CSTSRN6

2.5 sq.mm Double Level Terminal Blocks with Temperature Sensor indication - TS1 Configuration

These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.
The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block .The range includes Terminal Blocks for wire sizes from 1.5 to 35 sq mm.
Cross connection can be achieved with the aid of external shorting links.
It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.

CTS35L

50 sq.mm Bus Bar Type Terminal Blocks with locking nut.

These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes from 16 sq.mm to 120 sq.mm. CTS35LS Terminal Blocks have a threading in the current bar, eliminating the need of locking nuts.
Partition / Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.

CTS70L

70 sq.mm Nut Bolt Type Terminal Blocks with locking nut.

These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition / Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.

CTS95L

95 sq.mm Nut Bolt Type Terminal Blocks with locking nut.

These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. Partition / Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.

CTS35LS

50 sq.mm Slotted Bolt Type Terminal Blocks with tapped current bars.

These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. CTS35LS Terminal Blocks have a threading in the current bar, eliminating the need of locking nuts.Partition / Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.

CTS70LS

70 sq.mm Bus Bar Type Terminal Blocks with tapped current bars.

These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. CTS70LS Terminal Blocks have a threading in the current bar, eliminating the need of locking nuts.Partition / Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.

CTS95LS

95 sq.mm Bus Bar Type Terminal Blocks with tapped current bars.

These Terminal Blocks are preferred for applications using wires of a large cross section. The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. CTS95LS Terminal Blocks have a threading in the current bar, eliminating the need of locking nuts.Partition / Isolation Plate must be used with every Terminal Block. The Protective Cover is designed to be mounted on a specially designed slot in the Partition Plate.

CPDL4(E)DD1

4 sq.mm Terminal Blocks with diode circuit - DD1 configuration

CPDL4(E)DD2

4 sq.mm Terminal Blocks with diode circuit - DD2 configuration

CPDL4(E)DD3

4 sq.mm Terminal Blocks with diode circuit - DD3 configuration

CPDL4(E)DD4

4 sq.mm Terminal Blocks with diode circuit - DD4 configuration

CPDL4(E)DD5

44 sq.mm Terminal Blocks with diode circuit - DD5 configuration

CPDL4(E)DD6

4 sq.mm Terminal Blocks with diode circuit - DD6 configuration

CPDL4(E)LD1

4 sq.mm Double Level Terminal Blocks with LED indication for LD1 Configuration

CPDL4(E)TS1

4 sq.mm Double Level Terminal Blocks with Temperature Sensor indication - TS1 Configuration