bg_image

FEATURES

  • Robust design
  • Easy handling with firm gripping (designed as per ergonomics)
  • Ample space for cabling
  • Available V0 UL94 self-extinguishing material
  • Interlocking between flush heads for safe operations
  • Available in single & double speed
  • Available with hook for better mounting provision
  • Arrow indication for push buttons with pad printing, laser marking and screen printing
  • Contact blocks (As per IEC 60947-5-1 Standards)
  • Flush head push buttons with 1million operation cycles
  • Cable entry with rubber hose to host more then 16 core cable
  • Inbuilt ejection protection for contact blocks
  • Available in customer specific colors and combinations
  • Compatible for indoor and outdoor application
Electrical Specification:
Sr.No Parameters Specification
1 Rated Voltage 250 VAC; 24 V DC
2 Rated Current 6-10 Amp
3 Rated Operation Current AC (50 to 60Hz) DC
Ue
V
Ie/AC 15
(utilization category)
Ue
V
Ie/DC 13
(utilization category)
250 6 24 1.5
4 Insulation Resistance 100MΩ above (at 500VDC)
5 Withstand Voltage / HV Current-carrying and non-current-carrying metal parts, Between terminal and earthing: 1500VAC, 50/60HZ
6 Terminal Torque 0.8 Nm (Minimum)
7 Life: Electrical: 1000000 cycles (1 Million) (Push Button & Contacts)*
Mechanical: 1000000 cycles (1 million)*
8 Connection Screw type terminal
Environmental Conditions:
1 Ambient Temperature -10~+65°C
2 Humidity 95% RH (65°C)
3 Operating Temperature -20°C to 65°C
4 Storage Temperature -30°C to 70°C
Material:

Base / Cover – Tough, Impact resistant & fire retardant Plastic.

Gasket – Rubber with excellent resistance for UV exposure, Ozone & Weathering.

Screws – Half threaded Self Tapping Screws (salt spray of 168-hour test) with ASTN standard

Approvals:

Degree of Protection: IP65 / IP20 for Elements / Contact Blocks (As per IEC 60529 Standards). RoHS compliant.

Installation:
  1. Unscrew and remove the black cover.
  2. Unscrew the NC and NO contact block/Elements.
  3. Insert the cable through hose and passes through cable clamp.
  4. Strip the cable length suitable for wiring the switches (crimp with suitable terminal).
  5. Tape the stripped part of the cable.
  6. Make wiring and screwing the NO, NC Contact block with 0.8 Nm Torque.
  7. Tighten the cable clamp on the cable.
  8. Screw the enclosure by skilled operator, check rubber gasket placed neatly to guarantee protection against water and dust.
Drawings Image