Multiple Level

Multiple Level

CMC1-2

2.5 sq.mm Offset Double Level Terminal Blocks.

ODL2.5 Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODL2.5 sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible with standard push in links.

ODL2.5(I.S)

2.5 sq.mm offset double Level Internally Shorted Terminal Blocks.

ODL2.5(I.S) internally shorted Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODL2.5(I.S) sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible with standard push in links.

ODLG2.5

2.5 sq.mm offset Double Level Earthing Terminal Blocks.

ODL2.5A

2.5 sq.mm 2 Level Offset stackable type Terminal Block in Grey colour

ODL2.5A Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODL2.5A sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible with standard push in links.

ODL2.5A(I.S)

2.5 sq.mm 2 Level Offset internally shorted stackable type Terminal Block in Grey colour

ODL2.5A(I.S) internally shorted Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODL2.5A(I.S) sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible with standard push in links.

ODLG2.5A

2.5 sq.mm offset stackable Double Level Earthing Terminal Blocks.

ODL4U

4 sq.mm Offset Double Level Terminal Blocks.

ODL4U Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODl4U sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible at both levels.

ODL4UA

Stackable 4 sq.mm Offset Double Level Terminal Blocks.

ODL4U Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODl4U sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible at both levels.

CDL4UN

4 sq.mm Double Level Terminal Blocks.

These blocks are ideal for use in applications requiring high density wiring . Interconnection / shorting is possible at both levels. CDL4UN is the newer version of the CDL4U Terminal Block. It is suited for 800 V application and can accommodate larger K6 marking tags.

CDL4UN(I.S)

4 sq.mm Double Level Internally Shorted Terminal Blocks.

In the CDL4UN(I.S) Terminal Blocks, both levels are internally shorted. These blocks are useful for distribution application with the aid of shorting links at the lower level.

CDLG4

4 sq.mm Double Level Earthing Terminal Blocks.

CDLG2.5

Two Level + Ground Feed through Terminal block

These blocks are ideal for use in application requiring high density wiring. Interconnection shorting is possible at both levels. The CDLG2.5 is a double level terminal block with as additional connection point for earthing (Grounding) cables. This separate connection point is appropriately identified by the green yellow imprint on its top.

CTL2.5U

2.5 sq.mm Three Level Feed through Terminal Blocks

CTL2.5U Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit. The top level of CTL2.5U terminal block provides connection points for signal wires while the middle and bottom level are used for positive and negative potentials. Marking tags in blue and red colour besides the conventional white colour are suggested for effective identification.

CTL2.5U(I.S)

2.5 sq.mm Three Level internally shorted Terminal Blocks

CTL2.5U(I.S) Terminal Block is an internally shorted terminal block which can be used for distribution application ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections with internally shorted helps in tremendously increase wiring density in the circuit. In application where switching indication is required CTL2.5U(I.S) is the one with built in electronic component. Marking tags in blue and red colour besides the conventional white colour are suggested for effective identification.

CTL2.5UH

2.5 sq.mm Three Level Terminal Blocks suitable for sensor & actuator application

CTL2.5UH Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit. The top level of CTL2.5UH terminal block provides connection points for signal wires while the middle and bottom level are used for positive and negative potentials. Marking tags in blue and red colour besides the conventional white colour are suggested for effective identification.

CTL2.5UH(I.S)D2

2.5 sq.mm Three Level Terminal Blocks with Diode suitable for sensor & actuator application

CTL2.5UH(I.S)D2 Internally shorted Terminal Blocks with built-in Diode for reserve polarity protection ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections with internally shorted helps in tremendously increase wiring density in the circuit. In application where switching indication is required CTL2.5UH(I.S) D2 is the one with built in electronic component. Marking tags in blue and red colour besides the conventional white colour are suggested for effective identification.

CTL2.5UHL

2.5 sq.mm Three Level Terminal Blocks with LED suitable for sensor & actuator application

CTL2.5UHL Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit. In application where switching indication is required CTL2.5UHL is the one with built in electronic component. Marking tags in blue and red colour besides the conventional white colour are suggested for effective identification.

CTL2.5UL

2.5 sq.mm Three Level Feed through Terminal Block with LED

CTL2.5UL Terminal Blocks are an ideal choice for control systems where sensor and actuator applications are involved. The simplified three level connections tremendously increase wiring density in the circuit. In application where switching indication is required CTL2.5UL is the one with built in electronic component. Marking tags in blue and red colour besides the conventional white colour are suggested for effective identification.

CTLG2.5

Three Level + Ground Feed through Terminal block

The CTLG2.5 is a triple level Terminal Blockwith an additional connection for earthing cables.This separate connection point is appropriatelyidentified by the green - yellow imprint on its top.This Terminal Block is an ideal choice formotor, sensor, actuator and initiator connections.

ODL4UHV

4 sq.mm Offset Double Level Terminal Blocks.

ODL4U series Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODL4U sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible at both levels. ODL4UHV is specially designed for high voltage application.

ODL4UCR

4 sq.mm 2 Level Offset Corrosion Resistant Terminal Block in Grey colour

ODL4UCR Terminal Block , the top level is offset from the bottom level by half the thickness of the terminal block. this creates better access for the bottom level screw while the wires are connected. It is recommended to use End Plates at both ends of the assembled ODl4U sets for flat alignment to enable the effective use of end clamp. These are ideal for use in applications requiring high density wiring. Interconnection/shorting is possible at both levels.