logo
bg_image

STH3

6 sq. mm Stud Type Terminal Block - with captive nuts.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.
Data Sheet
Enquire Now

STH4

6 sq. mm Stud Type Terminal Block - with captive nuts.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.
Data Sheet
Enquire Now

STH6

35 sq. mm Stud Type Terminal Block - with captive nuts.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.
Data Sheet
Enquire Now

STH4DT

Stud Type Terminal Block
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DT Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers. Seperate testing points facilitate insertion of test probes. Disconnection is achieved by means of slide link operated with a screwdriver.
Data Sheet
Enquire Now

STH4DTFT

Stud Type Terminal Block
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DT Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers. Seperate testing points facilitate insertion of test probes. Disconnection is achieved by means of slide link operated with a screwdriver.
Data Sheet
Enquire Now

STH4DT/SW

6 sq.mm Stud/Nut Type Disconnect and Test Terminal Block with 1 Threaded and 1 Non Threaded Test Socket Terminal Block in Grey Colour
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DT Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers. Seperate testing points facilitate insertion of test probes. Disconnection is achieved by means of slide link operated with a screwdriver.
Data Sheet
Enquire Now

STH4DTTP

6 sq. mm M4 Stud Disconnect & Test Terminal Block - with captive nuts.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DT Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers. Seperate testing points facilitate insertion of test probes. Disconnection is achieved by means of slide link operated with a screwdriver.
Data Sheet
Enquire Now

STH4DTSH

6 sq. mm M4 Stud Disconnect & Test shorted Terminal Block - with captive nuts.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DTSH Terminal Block has 2 STH4DT Terminal Blocks shorted to achieve switchable cross connection for current transformers. Two lugs can be connected to the Terminal without scrificing the safety of the Terminal Block.
Data Sheet
Enquire Now

CBS3U

M3 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSB3/N3U

M3 sized Stud Type Terminal Blocks, suitable for operation with screwdriver and nut driver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSB3/N3UL

M3 sized Stud Type Terminal Blocks, suitable for operation with screwdriver and nut driver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSB3/N3USH

M3 sized Stud Type Hinge Terminal Blocks, suitable for operation with screwdriver and nut driver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CBS4U

M4 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSB4/N4UN

M4 sized Stud Type Terminal Blocks, suitable for operation with screwdriver and nut driver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSTSN4U

Nut driver operated M4 sized Stud Type Terminal Blocks, with Universal Mounting Possibility.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes from 1.5 to 10 sq mm. Cross connection can be achieved with the aid of external shorting links. It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.
Data Sheet
Enquire Now

CSB4/N4USH

M4 sized Stud Type hinge Terminal Blocks, suitable for operation with screwdriver and nut driver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CBS5U

M5 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSTSN5U

Nut driver operated M5 sized Stud Type Terminal Blocks, with Universal Mounting Possibility.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes from 1.5 to 16 sq mm. Cross connection can be achieved with the aid of external shorting links. It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.
Data Sheet
Enquire Now

CSE5U

M5 sized Stud Type Terminal Blocks, suitable for operation with screwdriver.
  • CSE5U Terminal Block is used for earth link disconnection application.
  • The terminals can be operated using nut driver.
  • Cross connection is done using external shorting links.
Data Sheet
Enquire Now

CSTSB5U

Screwdriver operated M5 sized Stud Type Terminal Blocks, with Universal Mounting Possibility.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes from 1.5 to 16 sq mm. Cross connection can be achieved with the aid of external shorting links. It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.
Data Sheet
Enquire Now

CSB5/N5U

M5 sized Stud Type Terminal Blocks, suitable for operation with screwdriver and nut driver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSB5/N5USH

M5 sized Stud Type hinge Terminal Blocks, suitable for operation with screwdriver and nut driver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSTSN6U

Nut driver operated M6 sized Stud Type Terminal Blocks, with Universal Mounting Possibility.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes from 1.5 to 35 sq mm. Cross connection can be achieved with the aid of external shorting links. It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.
Data Sheet
Enquire Now

CSTSN6USH

Nut driver operated M6 sized Stud Type Hinge Terminal Blocks, with Universal Mounting Possibility.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes from 1.5 to 35 sq mm. Cross connection can be achieved with the aid of external shorting links. It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.
Data Sheet
Enquire Now

PTB35/50

50 sq.mm Stud Type Power Terminal Block.
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holdsthe Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. In PTB35SH, PTB70SH Terminal Blocks a hinged protective cover makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Data Sheet
Enquire Now

PTB35/50SH

50 sq.mm Stud Type Power Terminal Blocks with Hinged Protective Cover
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holdsthe Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. In PTB35SH, PTB70SH Terminal Blocks a hinged protective cover makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Data Sheet
Enquire Now

PTB35/50/M

50 sq.mm Stud Type Power Terminal Blocks.
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holdsthe Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. In PTB35SH, PTB70SH Terminal Blocks a hinged protective cover makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Data Sheet
Enquire Now

PTB70/95

95 sq.mm Stud Type Power Terminal Blocks
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holdsthe Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. In PTB35SH, PTB70SH Terminal Blocks a hinged protective cover makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Data Sheet
Enquire Now

PTB70/95SH

95 sq.mm Stud Type Power Terminal Blocks with Hinged Protective Cover.
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holdsthe Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. In PTB70/95SH Terminal Blocks a hinged protective cover makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Data Sheet
Enquire Now

PTB120/150

150 sq.mm Stud Type Power Terminal Blocks
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holdsthe Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. In PTB35SH, PTB70SH, etc Terminal Blocks a hinged protective cover makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Data Sheet
Enquire Now

PTB120/150SH

150 sq.mm Stud Type Power Terminal Blocks with Hinged Protective Cover.
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holds the Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block.
Data Sheet
Enquire Now

PTB185/240

240 sq.mm Stud Type Power Terminal Blocks
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holds the Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block.
Data Sheet
Enquire Now

PTB185/240SH

240 sq.mm Stud Type Power Terminal Blocks with Hinged Protective Cover
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holds the Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. The Terminal Blocks comes with hinged protective cover ( shroud ) that makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Data Sheet
Enquire Now

PTB300

300 sq.mm Stud Type Power Terminal Blocks
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holds the Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block.
Data Sheet
Enquire Now

PTB300SH

300 sq.mm Stud Type Power Terminal Blocks
  • PTB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block. Specially designed Mounting Feet holds the Terminal Block rigidly on to the Mounting Rail.Two Lugs of the rated cross section can be connected to the Terminal Block, without sacrificing the safety of the Terminal Block. The Terminal Blocks comes with hinged protective cover ( shroud ) that makes the Terminal Block shock proof (finger safe) and has marker recess to accept marking tag.
Data Sheet
Enquire Now

CBB35/50

50 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB35/50LS

50 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB70

70 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB70LS

70 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB95

95 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB95LS

95 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB120

120 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB120LS

120 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB150

150 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB150LS

150 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB185

185 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CBB185LS

185 sq.mm Stud Type Power Terminal Blocks
  • CBB series Terminal Blocks are preferred for application using wires of large cross section. The Wire is crimped to a ring / fork lug and is screwed on to the flat current bar of the Terminal Block.
Data Sheet
Enquire Now

CWSTHCT6

6 Way CT shorting Assembly
  • This is a 6 pole Current Transformer shorting Terminal block assembly. All Meter and CT connections can be safely terminated with the help of captive nuts in the terminals. A central shorting current bar is pre-installed and CT shorting screws can be connected in the respective points to short the secondary of CTs for measurement and calibration of meters. The entire assembly is IP20 shock resistant and standard K series marking tags can be installed for clear circuit identification.
Data Sheet
Enquire Now

CSST4

4 sq.mm Single Stud Type Terminal Block.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSST4 Terminal Blocks suitable for wire sizes from 1.5 to 4 sq.mm. The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSST8

70 sq.mm Single Stud Type Terminal Block.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSST8 Terminal Blocks suitable for wire sizes from 6 to 70 sq.mm The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSST10

120 sq.mm Single Stud Type Terminal Block.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSST10 Terminal Blocks suitable for wire sizes from 10 to 120 sq.mm. The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSTD5

10 sq.mm Stud Type Terminal Block.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSTD5 Terminal Blocks suitable for wire sizes from 6 to 10 sq.mm. The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSTDE

6 sq.mm Stud Type Diode Terminal with Heat Sink
  • CSTDE Terminal blocks are preferred for applications where the connections are subjected to severe vibrations.
  • These Terminal Blocks are suitable for screw and solder diodes type SKNa4 or SKN5.
  • Connection can be done by 8 tabs with quick connectors size 6.3 x 0.8mm
Data Sheet
Enquire Now

CSTDE2

6 sq.mm Tab Connection Diode Terminal Block
  • CSTDE2 Terminal blocks are preferred for applications where the connections are subjected to severe vibrations.
  • These Terminal Blocks are suitable for solder diodes type SKN2.5 or SKNa2.
  • Connections can be done by 4 tabs with quick connectors size 6.3 x 0.8mm
Data Sheet
Enquire Now

CWCBSCT6

6 Way CT shorting Assembly
  • This is a 6 pole Current Transformer shorting Terminal block assembly. A central shorting current bar is pre-installed and CT shorting screws can be connected in the respective points to short the secondary of CTs for measurement and calibration of meters. Standard K series marking tags can be installed for clear circuit identification.
Data Sheet
Enquire Now

STH6-M5

35 sq. mm Stud Type Terminal Block - with captive nuts.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring.
Data Sheet
Enquire Now

CSN6

35 sq.mm Nut driver operated M6 sized Stud Type Terminal Blocks, with Universal Mounting Possibility.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The range includes Terminal Blocks for wire sizes from 1.5 to 35 sq mm. Cross connection can be achieved with the aid of external shorting links. It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies.
Data Sheet
Enquire Now

CSB4/N4UL

M4 sized Stud Type Terminal Blocks, suitable for operation with screwdriver and nut driver.
  • This Terminal Block is preferred for applications where the connections are subjected to severe vibrations.
  • The wire is crimped to a ring / fork type lug (ferrule) and is screwed on to the flat current bar on the Terminal Block. cross connection can be achieved with the aid of internal shorting links.
  • It is recommended to use Protective Covers in transparent plastic to fully shroud these assemblies. Wiring can be done with the help of screw driver as well as nut driver.
Data Sheet
Enquire Now

CSTD5E16

16 sq.mm Stud Type Terminal Block.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSTD5E16 Terminal Blocks suitable for wire sizes from 2.5 to 16 sq.mm. The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSST6

35 sq.mm Single Stud Type Terminal Block.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSST6 Terminal Blocks suitable for wire sizes from 2.5 to 35 sq.mm The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSST6V12

CSST6V12 35 sq.mm Single Stud Type Terminal Block with Horizontal and Vertical Tab connection
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. Terminal Blocks suitable for wire sizes from 2.5 to 35 sq.mm The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

STH4DTNS

Stud Type Terminal Block
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations.The wire is crimped to ring /fork type Lug (Ferrule) and is screwed on to flat current bar on the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The Hinged Carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. By the virtue of the hinged design the Terminal Blocks apart from shrouding the live parts, providing IP20 protection, saves considerable time in wiring. STH4DTNS Disconnect & Test Terminal Block is used for measuring, control and regulatory circuits. They provide a clear functional advantage for devices having utility instruments and associated transformers.Disconnection is achieved by means of slide link operated with a screwdriver.
Data Sheet
Enquire Now

CSST6H12

CSST6H12 35 sq.mm Single Stud Type Terminal Block with Horizontal Tab connection
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. Terminal Blocks suitable for wire sizes from 2.5 to 35 sq.mm The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSTD5E16W

16 sq.mm Stud Type Terminal Block.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSTD5E16W Terminal Blocks suitable for wire sizes from 2.5 to 16 sq.mm. The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSST5E

10 sq.mm Single Stud Type Terminal Block.
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSST5E Terminal Blocks suitable for wire sizes from 1.5 to 4 sq.mm. The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now

CSST6/2

CSST6/2 Double Stud Terminal Block
  • These Terminal Blocks are preferred for applications where the connections are subjected to severe vibrations. The wire is crimped to ring type Lug and connected to the Stud Terminal Block. The CSST6/2 Terminal Blocks suitable for wire sizes from 2.5 to 35 sq.mm The self locking nut can then be fastened to complete the connection.
Data Sheet
Enquire Now
whatsapp